YAML Reference

This page lists all components, interpolation variables and interpolation macros that can be used when defining a low code YAML file.

For the technical JSON schema definition that low code manifests are validated against, see here.

Components

DeclarativeSource `object`

An API source that extracts data according to its declarative components.

Properties:

check #/definitions/CheckStream
streams array #/definitions/DeclarativeStream
version string
schemas #/definitions/Schemas
spec #/definitions/Spec
metadata object
For internal Airbyte use only - DO NOT modify manually. Used by consumers of declarative manifests for storing related metadata.

AddedFieldDefinition `object`

Defines the field to add on a record.

Properties:

path array
List of strings defining the path where to add the value on the record.
Examples:
```
[
  "segment_id"
]
```
```
[
  "metadata",
  "segment_id"
]
```
value string
Value of the new field. Use {{ record['existing_field'] }} syntax to refer to other fields in the record.
Available variables:
Examples:
```
{{ record['updates'] }}
```
```
{{ record['MetaData']['LastUpdatedTime'] }}
```
```
{{ stream_partition['segment_id'] }}
```
value_type #/definitions/ValueType
Type of the value. If not specified, the type will be inferred from the value.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

AddFields `object`

Transformation which adds field to an output record. The path of the added field can be nested.

Properties:

fields array
List of transformations (path and corresponding value) that will be added to the record.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

ApiKeyAuthenticator `object`

Authenticator for requests authenticated with an API token injected as an HTTP request header.

Properties:

api_token string
The API key to inject in the request. Fill it in the user inputs.
Available variables:
- config
Examples:
```
{{ config['api_key'] }}
```
```
Token token={{ config['api_key'] }}
```
header string
The name of the HTTP header that will be set to the API key. This setting is deprecated, use inject_into instead. Header and inject_into can not be defined at the same time.
Available variables:
- config
Examples:
```
Authorization
```
```
Api-Token
```
```
X-Auth-Token
```
inject_into #/definitions/RequestOption
Configure how the API Key will be sent in requests to the source API. Either inject_into or header has to be defined.
Examples:
```
{
  "inject_into": "header",
  "field_name": "Authorization"
}
```
```
{
  "inject_into": "request_parameter",
  "field_name": "authKey"
}
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

AuthFlow `object`

Additional and optional specification object to describe what an 'advanced' Auth flow would need to function.

A connector should be able to fully function with the configuration as described by the ConnectorSpecification in a 'basic' mode.
The 'advanced' mode provides easier UX for the user with UI improvements and automations. However, this requires further setup on the server side by instance or workspace admins beforehand. The trade-off is that the user does not have to provide as many technical inputs anymore and the auth process is faster and easier to complete.

Properties:

auth_flow_type string
The type of auth to use
predicate_key array
JSON path to a field in the connectorSpecification that should exist for the advanced auth to be applicable.
Example:
```
[
  "credentials",
  "auth_type"
]
```
predicate_value string
Value of the predicate_key fields for the advanced auth to be applicable.
Example:
```
Oauth
```
oauth_config_specification #/definitions/OAuthConfigSpecification

BasicHttpAuthenticator `object`

Authenticator for requests authenticated with the Basic HTTP authentication scheme, which encodes a username and an optional password in the Authorization request header.

Properties:

username string
The username that will be combined with the password, base64 encoded and used to make requests. Fill it in the user inputs.
Available variables:
- config
Examples:
```
{{ config['username'] }}
```
```
{{ config['api_key'] }}
```
password string
The password that will be combined with the username, base64 encoded and used to make requests. Fill it in the user inputs.
Available variables:
- config
Examples:
```
{{ config['password'] }}
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

BearerAuthenticator `object`

Authenticator for requests authenticated with a bearer token injected as a request header of the form Authorization: Bearer <token>.

Properties:

api_token string
Token to inject as request header for authenticating with the API.
Available variables:
- config
Examples:
```
{{ config['api_key'] }}
```
```
{{ config['token'] }}
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

SelectiveAuthenticator `object`

Authenticator that selects concrete authenticator based on config property.

Properties:

authenticator_selection_path array
Path of the field in config with selected authenticator name
Examples:
```
[
  "auth"
]
```
```
[
  "auth",
  "type"
]
```

authenticators `object`

Authenticators to select from.

Example:

{
  "authenticators": {
    "token": "#/definitions/ApiKeyAuthenticator",
    "oauth": "#/definitions/OAuthAuthenticator"
  }
}

$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CheckStream `object`

Defines the streams to try reading when running a check operation.

Properties:

stream_names array
Names of the streams to try reading from when running a check operation.
Examples:
```
[
  "users"
]
```
```
[
  "users",
  "contacts"
]
```

CompositeErrorHandler `object`

Error handler that sequentially iterates over a list of error handlers.

Properties:

error_handlers array
List of error handlers to iterate on to determine how to handle a failed response.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

ConstantBackoffStrategy `object`

Backoff strategy with a constant backoff interval.

Properties:

backoff_time_in_seconds
Backoff time in seconds.
Type:
- number
- string
Available variables:
- config
Examples:
```
30
```
```
30.5
```
```
{{ config['backoff_time'] }}
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CursorPagination `object`

Pagination strategy that evaluates an interpolated string to define the next page to fetch.

Properties:

cursor_value string
Value of the cursor defining the next page to fetch.
Available variables:
Examples:
```
{{ headers.link.next.cursor }}
```
```
{{ last_records[-1]['key'] }}
```
```
{{ response['nextPage'] }}
```
page_size integer
The number of records to include in each pages.
Example:
```
100
```
stop_condition string
Template string evaluating when to stop paginating.
Available variables:
Examples:
```
{{ response.data.has_more is false }}
```
```
{{ 'next' not in headers['link'] }}
```
decoder #/definitions/JsonDecoder
Component decoding the response so records can be extracted.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomAuthenticator `object`

Authenticator component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom authentication strategy. Has to be a sub class of DeclarativeAuthenticator. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.ShortLivedTokenAuthenticator
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomBackoffStrategy `object`

Backoff strategy component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom backoff strategy. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomBackoffStrategy
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomErrorHandler `object`

Error handler component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom error handler. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomErrorHandler
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomIncrementalSync `object`

Incremental component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom incremental sync. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomIncrementalSync
```
cursor_field string
The location of the value on a record that will be used as a bookmark during sync.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomPaginationStrategy `object`

Pagination strategy component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom pagination strategy. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomPaginationStrategy
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomRecordExtractor `object`

Record extractor component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom record extraction strategy. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomRecordExtractor
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomRecordFilter `object`

Record filter component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom record filter strategy. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomCustomRecordFilter
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomRequester `object`

Requester component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom requester strategy. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomRecordExtractor
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomRetriever `object`

Retriever component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom retriever strategy. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomRetriever
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomPartitionRouter `object`

Partition router component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom partition router. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomPartitionRouter
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomSchemaLoader `object`

Schema Loader component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom schema loader. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomSchemaLoader
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomStateMigration `object`

Apply a custom transformation on the input state.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom state migration. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomStateMigration
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

CustomTransformation `object`

Transformation component whose behavior is derived from a custom code implementation of the connector.

Properties:

class_name string
Fully-qualified name of the class that will be implementing the custom transformation. The format is source_<name>.<package>.<class_name>.
Example:
```
source_railz.components.MyCustomTransformation
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

LegacyToPerPartitionStateMigration `object`

Transforms the input state for per-partitioned streams from the legacy format to the low-code format. The cursor field and partition ID fields are automatically extracted from the stream's DatetimebasedCursor and SubstreamPartitionRouter. Example input state: { "13506132": { "last_changed": "2022-12-27T08:34:39+00:00" } Example output state: { "partition": {"id": "13506132"}, "cursor": {"last_changed": "2022-12-27T08:34:39+00:00"} }

Properties:

DatetimeBasedCursor `object`

Cursor to provide incremental capabilities over datetime.

Properties:

cursor_field string
The location of the value on a record that will be used as a bookmark during sync. To ensure no data loss, the API must return records in ascending order based on the cursor field. Nested fields are not supported, so the field must be at the top level of the record. You can use a combination of Add Field and Remove Field transformations to move the nested field to the top.
Available variables:
- config
Examples:
```
created_at
```
```
{{ config['record_cursor'] }}
```
datetime_format string
The datetime format used to format the datetime values that are sent in outgoing requests to the API. Use placeholders starting with "%" to describe the format the API is using. The following placeholders are available:
- %s: Epoch unix timestamp - 1686218963
- %ms: Epoch unix timestamp (milliseconds) - 1686218963123
- %a: Weekday (abbreviated) - Sun
- %A: Weekday (full) - Sunday
- %w: Weekday (decimal) - 0 (Sunday), 6 (Saturday)
- %d: Day of the month (zero-padded) - 01, 02, ..., 31
- %b: Month (abbreviated) - Jan
- %B: Month (full) - January
- %m: Month (zero-padded) - 01, 02, ..., 12
- %y: Year (without century, zero-padded) - 00, 01, ..., 99
- %Y: Year (with century) - 0001, 0002, ..., 9999
- %H: Hour (24-hour, zero-padded) - 00, 01, ..., 23
- %I: Hour (12-hour, zero-padded) - 01, 02, ..., 12
- %p: AM/PM indicator
- %M: Minute (zero-padded) - 00, 01, ..., 59
- %S: Second (zero-padded) - 00, 01, ..., 59
- %f: Microsecond (zero-padded to 6 digits) - 000000
- %z: UTC offset - (empty), +0000, -04:00
- %Z: Time zone name - (empty), UTC, GMT
- %j: Day of the year (zero-padded) - 001, 002, ..., 366
- %U: Week number of the year (starting Sunday) - 00, ..., 53
- %W: Week number of the year (starting Monday) - 00, ..., 53
- %c: Date and time - Tue Aug 16 21:30:00 1988
- %x: Date standard format - 08/16/1988
- %X: Time standard format - 21:30:00
- %%: Literal '%' character
Some placeholders depend on the locale of the underlying system - in most cases this locale is configured as en/US. For more information see the Python documentation.
Examples:
```
%Y-%m-%dT%H:%M:%S.%f%z
```
```
%Y-%m-%d
```
```
%s
```
```
%ms
```
start_datetime
The datetime that determines the earliest record that should be synced.
Type:
- string
- #/definitions/MinMaxDatetime
Available variables:
- config
Examples:
```
2020-01-1T00:00:00Z
```
```
{{ config['start_time'] }}
```
cursor_datetime_formats array
The possible formats for the cursor field, in order of preference. The first format that matches the cursor field value will be used to parse it. If not provided, the datetime_format will be used.
cursor_granularity string
Smallest increment the datetime_format has (ISO 8601 duration) that is used to ensure the start of a slice does not overlap with the end of the previous one, e.g. for %Y-%m-%d the granularity should be P1D, for %Y-%m-%dT%H:%M:%SZ the granularity should be PT1S. Given this field is provided, step needs to be provided as well.
Example:
```
PT1S
```
end_datetime
The datetime that determines the last record that should be synced. If not provided, {{ now_utc() }} will be used.
Type:
- string
- #/definitions/MinMaxDatetime
Available variables:
- config
Examples:
```
2021-01-1T00:00:00Z
```
```
{{ now_utc() }}
```
```
{{ day_delta(-1) }}
```
end_time_option #/definitions/RequestOption
Optionally configures how the end datetime will be sent in requests to the source API.
is_data_feed boolean
A data feed API is an API that does not allow filtering and paginates the content from the most recent to the least recent. Given this, the CDK needs to know when to stop paginating and this field will generate a stop condition for pagination.
lookback_window string
Time interval before the start_datetime to read data for, e.g. P1M for looking back one month.
Available variables:
- config
Examples:
```
P1D
```
```
P{{ config['lookback_days'] }}D
```
partition_field_end string
Name of the partition start time field.
Example:
```
ending_time
```
partition_field_start string
Name of the partition end time field.
Example:
```
starting_time
```
start_time_option #/definitions/RequestOption
Optionally configures how the start datetime will be sent in requests to the source API.
step string
The size of the time window (ISO8601 duration). Given this field is provided, cursor_granularity needs to be provided as well.
Examples:
```
P1W
```
```
{{ config['step_increment'] }}
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

OAuthAuthenticator `object`

Authenticator for requests using OAuth 2.0 authorization flow.

Properties:

client_id string
The OAuth client ID. Fill it in the user inputs.
Examples:
```
{{ config['client_id }}
```
```
{{ config['credentials']['client_id }}
```
client_secret string
The OAuth client secret. Fill it in the user inputs.
Examples:
```
{{ config['client_secret }}
```
```
{{ config['credentials']['client_secret }}
```
refresh_token string
Credential artifact used to get a new access token.
Examples:
```
{{ config['refresh_token'] }}
```
```
{{ config['credentials]['refresh_token'] }}
```
token_refresh_endpoint string
The full URL to call to obtain a new access token.
Example:
```
https://connect.squareup.com/oauth2/token
```
access_token_name string
The name of the property which contains the access token in the response from the token refresh endpoint.
Example:
```
access_token
```
expires_in_name string
The name of the property which contains the expiry date in the response from the token refresh endpoint.
Example:
```
expires_in
```
grant_type string
Specifies the OAuth2 grant type. If set to refresh_token, the refresh_token needs to be provided as well. For client_credentials, only client id and secret are required. Other grant types are not officially supported.
Examples:
```
refresh_token
```
```
client_credentials
```

refresh_request_body `object`

Body of the request sent to get a new access token.

Example:

{
  "applicationId": "{{ config['application_id'] }}",
  "applicationSecret": "{{ config['application_secret'] }}",
  "token": "{{ config['token'] }}"
}

scopes `array`

List of scopes that should be granted to the access token.

Example:

[
  "crm.list.read",
  "crm.objects.contacts.read",
  "crm.schema.contacts.read"
]

token_expiry_date string
The access token expiry date.
Examples:
```
2023-04-06T07:12:10.421833+00:00
```
```
1680842386
```
token_expiry_date_format string
The format of the time to expiration datetime. Provide it if the time is returned as a date-time string instead of seconds.
Example:
```
%Y-%m-%d %H:%M:%S.%f+00:00
```
refresh_token_updater
When the token updater is defined, new refresh tokens, access tokens and the access token expiry date are written back from the authentication response to the config object. This is important if the refresh token can only used once.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

DeclarativeStream `object`

A stream whose behavior is described by a set of declarative low code components.

Properties:

retriever
Component used to coordinate how records are extracted across stream slices and request pages.
Type:
- #/definitions/CustomRetriever
- #/definitions/SimpleRetriever
incremental_sync
Component used to fetch data incrementally based on a time field in the data.
Type:
- #/definitions/CustomIncrementalSync
- #/definitions/DatetimeBasedCursor
name string
The stream name.
primary_key #/definitions/PrimaryKey
The primary key of the stream.
schema_loader
Component used to retrieve the schema for the current stream.
Type:
transformations array
A list of transformations to be applied to each output record.
state_migrations array
Array of state migrations to be applied on the input state
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

DefaultErrorHandler `object`

Component defining how to handle errors. Default behavior includes only retrying server errors (HTTP 5XX) and too many requests (HTTP 429) with an exponential backoff.

Properties:

backoff_strategies array
List of backoff strategies to use to determine how long to wait before retrying a retryable request.
max_retries integer
The maximum number of time to retry a retryable request before giving up and failing.
Examples:
```
5
```
```
0
```
```
10
```
response_filters array #/definitions/HttpResponseFilter
List of response filters to iterate on when deciding how to handle an error. When using an array of multiple filters, the filters will be applied sequentially and the response will be selected if it matches any of the filter's predicate.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

DefaultPaginator `object`

Default pagination implementation to request pages of results with a fixed size until the pagination strategy no longer returns a next_page_token.

Properties:

pagination_strategy
Strategy defining how records are paginated.
Type:
decoder #/definitions/JsonDecoder
Component decoding the response so records can be extracted.
page_size_option #/definitions/RequestOption
page_token_option
Type:
- #/definitions/RequestOption
- #/definitions/RequestPath
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

DpathExtractor `object`

Record extractor that searches a decoded response over a path defined as an array of fields.

Properties:

field_path array
List of potentially nested fields describing the full path of the field to extract. Use "*" to extract all values from an array. See more info in the docs.
Examples:
```
[
  "data"
]
```
```
[
  "data",
  "records"
]
```
```
[
  "data",
  "{{ parameters.name }}"
]
```
```
[
  "data",
  "*",
  "record"
]
```
decoder #/definitions/JsonDecoder
Component decoding the response so records can be extracted.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

ExponentialBackoffStrategy `object`

Backoff strategy with an exponential backoff interval. The interval is defined as factor * 2^attempt_count.

Properties:

factor
Multiplicative constant applied on each retry.
Type:
- number
- string
Available variables:
- config
Examples:
```
5
```
```
5.5
```
```
10
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

SessionTokenAuthenticator `object`

Properties:

login_requester `#/definitions/HttpRequester`

Description of the request to perform to obtain a session token to perform data requests. The response body is expected to be a JSON object with a session token property.

Example:

{
  "type": "HttpRequester",
  "url_base": "https://my_api.com",
  "path": "/login",
  "authenticator": {
    "type": "BasicHttpAuthenticator",
    "username": "{{ config.username }}",
    "password": "{{ config.password }}"
  }
}

session_token_path array
The path in the response body returned from the login requester to the session token.
Examples:
```
[
  "access_token"
]
```
```
[
  "result",
  "token"
]
```
expiration_duration string
The duration in ISO 8601 duration notation after which the session token expires, starting from the time it was obtained. Omitting it will result in the session token being refreshed for every request.
Examples:
```
PT1H
```
```
P1D
```
request_authentication
Authentication method to use for requests sent to the API, specifying how to inject the session token.
Type:
- #/definitions/SessionTokenRequestApiKeyAuthenticator
- #/definitions/SessionTokenRequestBearerAuthenticator
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

SessionTokenRequestApiKeyAuthenticator `object`

Authenticator for requests using the session token as an API key that's injected into the request.

Properties:

inject_into `#/definitions/RequestOption`

Configure how the API Key will be sent in requests to the source API.

Examples:

{
  "inject_into": "header",
  "field_name": "Authorization"
}

{
  "inject_into": "request_parameter",
  "field_name": "authKey"
}

SessionTokenRequestBearerAuthenticator

Authenticator for requests using the session token as a standard bearer token.

Properties:

HttpRequester `object`

Requester submitting HTTP requests and extracting records from the response.

Properties:

url_base string
Base URL of the API source. Do not put sensitive information (e.g. API tokens) into this field - Use the Authentication component for this.
Available variables:
- config
Examples:
```
https://connect.squareup.com/v2
```
```
{{ config['base_url'] or 'https://app.posthog.com'}}/api/
```
path string
Path the specific API endpoint that this stream represents. Do not put sensitive information (e.g. API tokens) into this field - Use the Authentication component for this.
Available variables:
Examples:
```
/products
```
```
/quotes/{{ stream_partition['id'] }}/quote_line_groups
```
```
/trades/{{ config['symbol_id'] }}/history
```
authenticator
Authentication method to use for requests sent to the API.
Type:
error_handler
Error handler component that defines how to handle errors.
Type:
http_method string
The HTTP method used to fetch data from the source (can be GET or POST).
Examples:
```
GET
```
```
POST
```
request_body_data
Specifies how to populate the body of the request with a non-JSON payload. Plain text will be sent as is, whereas objects will be converted to a urlencoded form.
Type:
- string
- object
Available variables:
Example:
```
[{"clause": {"type": "timestamp", "operator": 10, "parameters":
    [{"value": {{ stream_interval['start_time'] | int * 1000 }} }]
  }, "orderBy": 1, "columnName": "Timestamp"}]/
```
request_body_json
Specifies how to populate the body of the request with a JSON payload. Can contain nested objects.
Type:
- string
- object
Available variables:
Examples:
```
{
  "sort_order": "ASC",
  "sort_field": "CREATED_AT"
}
```
```
{
  "key": "{{ config['value'] }}"
}
```
```
{
  "sort": {
    "field": "updated_at",
    "order": "ascending"
  }
}
```
request_headers
Return any non-auth headers. Authentication headers will overwrite any overlapping headers returned from this method.
Type:
- string
- object
Available variables:
Examples:
```
{
  "Output-Format": "JSON"
}
```
```
{
  "Version": "{{ config['version'] }}"
}
```

request_parameters

Specifies the query parameters that should be set on an outgoing HTTP request given the inputs.

Type:

string
object

Available variables:

next_page_token
stream_interval
stream_partition
stream_slice
stream_state

Examples:

{
  "unit": "day"
}

{
  "query": "last_event_time BETWEEN TIMESTAMP \"{{ stream_interval.start_time }}\" AND TIMESTAMP \"{{ stream_interval.end_time }}\""
}

{
  "searchIn": "{{ ','.join(config.get('search_in', [])) }}"
}

{
  "sort_by[asc]": "updated_at"
}

use_cache boolean
Enables stream requests caching. This field is automatically set by the CDK.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

HttpResponseFilter `object`

A filter that is used to select on properties of the HTTP response received. When used with additional filters, a response will be selected if it matches any of the filter's criteria.

Properties:

action string
Action to execute if a response matches the filter.
Examples:
```
SUCCESS
```
```
FAIL
```
```
RETRY
```
```
IGNORE
```
error_message string
Error Message to display if the response matches the filter.
Available variables:
error_message_contains string
Match the response if its error message contains the substring.
http_codes array
Match the response if its HTTP code is included in this list.
Examples:
```
[
  420,
  429
]
```
```
[
  500
]
```

predicate `string`

Match the response if the predicate evaluates to true.

Available variables:

response
headers

Examples:

{{ 'Too much requests' in response }}

{{ 'error_code' in response and response['error_code'] == 'ComplexityException' }}

$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

InlineSchemaLoader `object`

Loads a schema that is defined directly in the manifest file.

Properties:

schema object
Describes a streams' schema. Refer to the <a href="https://docs.airbyte.com/understanding-airbyte/supported-data-types/">Data Types documentation</a> for more details on which types are valid.

JsonFileSchemaLoader `object`

Loads the schema from a json file.

Properties:

file_path string
Path to the JSON file defining the schema. The path is relative to the connector module's root.
Available variables:
- config
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

JsonDecoder `object`

Properties:

ListPartitionRouter `object`

A Partition router that specifies a list of attributes where each attribute describes a portion of the complete data set for a stream. During a sync, each value is iterated over and can be used as input to outbound API requests.

Properties:

cursor_field string
While iterating over list values, the name of field used to reference a list value. The partition value can be accessed with string interpolation. e.g. "{{ stream_partition['my_key'] }}" where "my_key" is the value of the cursor_field.
Available variables:
- config
Examples:
```
section
```
```
{{ config['section_key'] }}
```
values
The list of attributes being iterated over and used as input for the requests made to the source API.
Type:
- string
- array
Available variables:
- config
Examples:
```
[
  "section_a",
  "section_b",
  "section_c"
]
```
```
{{ config['sections'] }}
```
request_option #/definitions/RequestOption
A request option describing where the list value should be injected into and under what field name if applicable.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

MinMaxDatetime `object`

Compares the provided date against optional minimum or maximum times. The max_datetime serves as the ceiling and will be returned when datetime exceeds it. The min_datetime serves as the floor.

Properties:

datetime string
Datetime value.
Available variables:
- config
Examples:
```
2021-01-01
```
```
2021-01-01T00:00:00Z
```
```
{{ config['start_time'] }}
```
datetime_format string
Format of the datetime value. Defaults to "%Y-%m-%dT%H:%M:%S.%f%z" if left empty. Use placeholders starting with "%" to describe the format the API is using. The following placeholders are available:
- %s: Epoch unix timestamp - 1686218963
- %ms: Epoch unix timestamp - 1686218963123
- %a: Weekday (abbreviated) - Sun
- %A: Weekday (full) - Sunday
- %w: Weekday (decimal) - 0 (Sunday), 6 (Saturday)
- %d: Day of the month (zero-padded) - 01, 02, ..., 31
- %b: Month (abbreviated) - Jan
- %B: Month (full) - January
- %m: Month (zero-padded) - 01, 02, ..., 12
- %y: Year (without century, zero-padded) - 00, 01, ..., 99
- %Y: Year (with century) - 0001, 0002, ..., 9999
- %H: Hour (24-hour, zero-padded) - 00, 01, ..., 23
- %I: Hour (12-hour, zero-padded) - 01, 02, ..., 12
- %p: AM/PM indicator
- %M: Minute (zero-padded) - 00, 01, ..., 59
- %S: Second (zero-padded) - 00, 01, ..., 59
- %f: Microsecond (zero-padded to 6 digits) - 000000, 000001, ..., 999999
- %z: UTC offset - (empty), +0000, -04:00
- %Z: Time zone name - (empty), UTC, GMT
- %j: Day of the year (zero-padded) - 001, 002, ..., 366
- %U: Week number of the year (Sunday as first day) - 00, 01, ..., 53
- %W: Week number of the year (Monday as first day) - 00, 01, ..., 53
- %c: Date and time representation - Tue Aug 16 21:30:00 1988
- %x: Date representation - 08/16/1988
- %X: Time representation - 21:30:00
- %%: Literal '%' character
Some placeholders depend on the locale of the underlying system - in most cases this locale is configured as en/US. For more information see the Python documentation.
Examples:
```
%Y-%m-%dT%H:%M:%S.%f%z
```
```
%Y-%m-%d
```
```
%s
```
max_datetime string
Ceiling applied on the datetime value. Must be formatted with the datetime_format field.
Available variables:
- config
Examples:
```
2021-01-01T00:00:00Z
```
```
2021-01-01
```
min_datetime string
Floor applied on the datetime value. Must be formatted with the datetime_format field.
Available variables:
- config
Examples:
```
2010-01-01T00:00:00Z
```
```
2010-01-01
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

NoAuth `object`

Authenticator for requests requiring no authentication.

Properties:

$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

NoPagination `object`

Pagination implementation that never returns a next page.

Properties:

OAuthConfigSpecification `object`

Specification describing how an 'advanced' Auth flow would need to function.

Properties:

oauth_user_input_from_connector_config_specification object
OAuth specific blob. This is a Json Schema used to validate Json configurations used as input to OAuth. Must be a valid non-nested JSON that refers to properties from ConnectorSpecification.connectionSpecification using special annotation 'path_in_connector_config'. These are input values the user is entering through the UI to authenticate to the connector, that might also shared as inputs for syncing data via the connector. Examples: if no connector values is shared during oauth flow, oauth_user_input_from_connector_config_specification=[] if connector values such as 'app_id' inside the top level are used to generate the API url for the oauth flow, oauth_user_input_from_connector_config_specification={ app_id: { type: string path_in_connector_config: ['app_id'] } } if connector values such as 'info.app_id' nested inside another object are used to generate the API url for the oauth flow, oauth_user_input_from_connector_config_specification={ app_id: { type: string path_in_connector_config: ['info', 'app_id'] } }
Examples:
```
{
  "app_id": {
    "type": "string",
    "path_in_connector_config": [
      "app_id"
    ]
  }
}
```
```
{
  "app_id": {
    "type": "string",
    "path_in_connector_config": [
      "info",
      "app_id"
    ]
  }
}
```
complete_oauth_output_specification object
OAuth specific blob. This is a Json Schema used to validate Json configurations produced by the OAuth flows as they are returned by the distant OAuth APIs. Must be a valid JSON describing the fields to merge back to ConnectorSpecification.connectionSpecification. For each field, a special annotation path_in_connector_config can be specified to determine where to merge it, Examples: complete_oauth_output_specification={ refresh_token: { type: string, path_in_connector_config: ['credentials', 'refresh_token'] } }
Example:
```
{
  "refresh_token": {
    "type": "string,",
    "path_in_connector_config": [
      "credentials",
      "refresh_token"
    ]
  }
}
```
complete_oauth_server_input_specification object
OAuth specific blob. This is a Json Schema used to validate Json configurations persisted as Airbyte Server configurations. Must be a valid non-nested JSON describing additional fields configured by the Airbyte Instance or Workspace Admins to be used by the server when completing an OAuth flow (typically exchanging an auth code for refresh token). Examples: complete_oauth_server_input_specification={ client_id: { type: string }, client_secret: { type: string } }
Example:
```
{
  "client_id": {
    "type": "string"
  },
  "client_secret": {
    "type": "string"
  }
}
```
complete_oauth_server_output_specification object
OAuth specific blob. This is a Json Schema used to validate Json configurations persisted as Airbyte Server configurations that also need to be merged back into the connector configuration at runtime. This is a subset configuration of complete_oauth_server_input_specification that filters fields out to retain only the ones that are necessary for the connector to function with OAuth. (some fields could be used during oauth flows but not needed afterwards, therefore they would be listed in the complete_oauth_server_input_specification but not complete_oauth_server_output_specification) Must be a valid non-nested JSON describing additional fields configured by the Airbyte Instance or Workspace Admins to be used by the connector when using OAuth flow APIs. These fields are to be merged back to ConnectorSpecification.connectionSpecification. For each field, a special annotation path_in_connector_config can be specified to determine where to merge it, Examples: complete_oauth_server_output_specification={ client_id: { type: string, path_in_connector_config: ['credentials', 'client_id'] }, client_secret: { type: string, path_in_connector_config: ['credentials', 'client_secret'] } }
Example:
```
{
  "client_id": {
    "type": "string,",
    "path_in_connector_config": [
      "credentials",
      "client_id"
    ]
  },
  "client_secret": {
    "type": "string,",
    "path_in_connector_config": [
      "credentials",
      "client_secret"
    ]
  }
}
```

OffsetIncrement `object`

Pagination strategy that returns the number of records reads so far and returns it as the next page token.

Properties:

page_size
The number of records to include in each pages.
Type:
- integer
- string
Available variables:
- config
- response
Examples:
```
100
```
```
{{ config['page_size'] }}
```
inject_on_first_request boolean
Using the offset with value 0 during the first request
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

PageIncrement `object`

Pagination strategy that returns the number of pages reads so far and returns it as the next page token.

Properties:

page_size
The number of records to include in each pages.
Type:
- integer
- string
Available variables:
- config
Examples:
```
100
```
```
100
```
```
{{ config['page_size'] }}
```
start_from_page integer
Index of the first page to request.
Examples:
```
0
```
```
1
```
inject_on_first_request boolean
Using the page number with value defined by start_from_page during the first request
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

ParentStreamConfig `object`

Describes how to construct partitions from the records retrieved from the parent stream..

Properties:

parent_key string
The primary key of records from the parent stream that will be used during the retrieval of records for the current substream. This parent identifier field is typically a characteristic of the child records being extracted from the source API.
Examples:
```
id
```
```
{{ config['parent_record_id'] }}
```
stream #/definitions/DeclarativeStream
Reference to the parent stream.
partition_field string
While iterating over parent records during a sync, the parent_key value can be referenced by using this field.
Examples:
```
parent_id
```
```
{{ config['parent_partition_field'] }}
```
request_option #/definitions/RequestOption
A request option describing where the parent key value should be injected into and under what field name if applicable.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

PrimaryKey

The stream field to be used to distinguish unique records. Can either be a single field, an array of fields representing a composite key, or an array of arrays representing a composite key where the fields are nested fields.

Examples:

id

[
  "code",
  "type"
]

RecordFilter `object`

Filter applied on a list of records.

Properties:

condition string
The predicate to filter a record. Records will be removed if evaluated to False.
Available variables:
Examples:
```
{{ record['created_at'] >= stream_interval['start_time'] }}
```
```
{{ record.status in ['active', 'expired'] }}
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

RecordSelector `object`

Responsible for translating an HTTP response into a list of records by extracting records from the response and optionally filtering records based on a heuristic.

Properties:

extractor
Type:
- #/definitions/CustomRecordExtractor
- #/definitions/DpathExtractor
record_filter
Responsible for filtering records to be emitted by the Source.
Type:
- #/definitions/CustomRecordFilter
- #/definitions/RecordFilter
schema_normalization #/definitions/SchemaNormalization
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

SchemaNormalization `string`

Responsible for normalization according to the schema.

Examples:

None

Default

RemoveFields `object`

A transformation which removes fields from a record. The fields removed are designated using FieldPointers. During transformation, if a field or any of its parents does not exist in the record, no error is thrown.

Properties:

condition string
The predicate to filter a property by a property value. Property will be removed if it is empty OR expression is evaluated to True.,
Available variables:
Examples:
```
{{ property|string == '' }}
```
```
{{ property is integer }}
```
```
{{ property|length > 5 }}
```
```
{{ property == 'some_string_to_match' }}
```
field_pointers array
Array of paths defining the field to remove. Each item is an array whose field describe the path of a field to remove.
Examples:
```
[
  "tags"
]
```
```
[
  [
    "content",
    "html"
  ],
  [
    "content",
    "plain_text"
  ]
]
```

RequestPath `object`

Specifies where in the request path a component's value should be inserted.

Properties:

RequestOption `object`

Specifies the key field and where in the request a component's value should be injected.

Properties:

field_name string
Configures which key should be used in the location that the descriptor is being injected into
Available variables:
- config
- parameters
Example:
```
segment_id
```
inject_into
Configures where the descriptor should be set on the HTTP requests. Note that request parameters that are already encoded in the URL path will not be duplicated.
Examples:
```
request_parameter
```
```
header
```
```
body_data
```
```
body_json
```

Schemas `object`

The stream schemas representing the shape of the data emitted by the stream.

LegacySessionTokenAuthenticator `object`

Deprecated - use SessionTokenAuthenticator instead. Authenticator for requests authenticated using session tokens. A session token is a random value generated by a server to identify a specific user for the duration of one interaction session.

Properties:

header string
The name of the session token header that will be injected in the request
Example:
```
X-Session
```
login_url string
Path of the login URL (do not include the base URL)
Example:
```
session
```
session_token string
Session token to use if using a pre-defined token. Not needed if authenticating with username + password pair
session_token_response_key string
Name of the key of the session token to be extracted from the response
Example:
```
id
```
username string
Username used to authenticate and obtain a session token
Example:
```
 {{ config['username'] }}
```
password string
Password used to authenticate and obtain a session token
Examples:
```
{{ config['password'] }}
```
validate_session_url string
Path of the URL to use to validate that the session token is valid (do not include the base URL)
Example:
```
user/current
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

SimpleRetriever `object`

Retrieves records by synchronously sending requests to fetch records. The retriever acts as an orchestrator between the requester, the record selector, the paginator, and the partition router.

Properties:

record_selector #/definitions/RecordSelector
Component that describes how to extract records from a HTTP response.
requester
Requester component that describes how to prepare HTTP requests to send to the source API.
Type:
- #/definitions/CustomRequester
- #/definitions/HttpRequester
paginator
Paginator component that describes how to navigate through the API's pages.
Type:
- #/definitions/DefaultPaginator
- #/definitions/NoPagination
ignore_stream_slicer_parameters_on_paginated_requests boolean
If true, the partition router and incremental request options will be ignored when paginating requests. Request options set directly on the requester will not be ignored.
partition_router
PartitionRouter component that describes how to partition the stream, enabling incremental syncs and checkpointing.
Type:
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

Spec `object`

A source specification made up of connector metadata and how it can be configured.

Properties:

connection_specification object
A connection specification describing how a the connector can be configured.
documentation_url string
URL of the connector's documentation page.
Example:
```
https://docs.airbyte.com/integrations/sources/dremio
```
advanced_auth #/definitions/AuthFlow
Advanced specification for configuring the authentication flow.

SubstreamPartitionRouter `object`

Partition router that is used to retrieve records that have been partitioned according to records from the specified parent streams. An example of a parent stream is automobile brands and the substream would be the various car models associated with each branch.

Properties:

parent_stream_configs array #/definitions/ParentStreamConfig
Specifies which parent streams are being iterated over and how parent records should be used to partition the child stream data set.
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

ValueType `string`

A schema type.

WaitTimeFromHeader `object`

Extract wait time from a HTTP header in the response.

Properties:

header string
The name of the response header defining how long to wait before retrying.
Available variables:
- config
Example:
```
Retry-After
```
regex string
Optional regex to apply on the header to extract its value. The regex should define a capture group defining the wait time.
Example:
```
([-+]?\d+)
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

WaitUntilTimeFromHeader `object`

Extract time at which we can retry the request from response header and wait for the difference between now and that time.

Properties:

header string
The name of the response header defining how long to wait before retrying.
Available variables:
- config
Example:
```
wait_time
```
min_wait
Minimum time to wait before retrying.
Type:
- number
- string
Available variables:
- config
Examples:
```
10
```
```
60
```
regex string
Optional regex to apply on the header to extract its value. The regex should define a capture group defining the wait time.
Available variables:
- config
Example:
```
([-+]?\d+)
```
$parameters object
Set parameters that are inherited to all children. See the section in the advanced topics for more details.

Interpolation variables

All string properties that list out available variables allow jinja expressions. They can be used by placing them in double curly braces: {{ config.property }}. The following variables are available

config `object`

The connector configuration. The object's keys are the same as the the keys defined in the connection specification.

Example:

{
  "start_date": "2010-01-01",
  "api_key": "*****"
}

parameters `object`

Additional runtime parameters, to be used for string interpolation. Parameters can be passed down from a parent component to its subcomponents using the $parameters key. This can be used to avoid repetitions.

Example:

{
  "path": "automations",
  "data_export_path": "automations",
  "cursor_field": "updated_at"
}

headers `object`

The HTTP headers from the last response received from the API. The object's keys are the header names from the response.

Example:

{
  "Server": "nginx",
  "Date": "Mon, 24 Apr 2023 20:17:21 GMT",
  "Content-Type": "application/json",
  "Content-Length": "420",
  "Connection": "keep-alive",
  "referrer-policy": "strict-origin-when-cross-origin",
  "x-content-type-options": "nosniff",
  "x-ratelimit-limit": "600",
  "x-ratelimit-remaining": "598",
  "x-ratelimit-reset": "39"
}

last_records `list`

List of records extracted from the last response received from the API.

Example:

[
  {
    "name": "Test List: 19",
    "id": "0236d6d2",
    "contact_count": 20,
    "_metadata": {
      "self": "https://api.sendgrid.com/v3/marketing/lists/0236d6d2"
    }
  },
  {
    "name": "List for CI tests, number 30",
    "id": "041ee031",
    "contact_count": 0,
    "_metadata": {
      "self": "https://api.sendgrid.com/v3/marketing/lists/041ee031"
    }
  }
]

next_page_token `object`

Object describing the token to fetch the next page of records. The object has a single key "next_page_token".

Examples:

{
  "next_page_token": 3
}

{
  "next_page_token": "https://api.sendgrid.com/v3/marketing/lists/0236d6d2-75d2-42c5-962d-603e0deaf8d1"
}

record `object`

The record being processed. The object's keys are the same keys as the records produced by the RecordSelector.

response `object`

The body of the last response received from the API. The object's keys are the same keys as the response body's.

Example:

{
  "result": [
    {
      "name": "Test List: 19",
      "id": "0236d6d2-75d2-42c5-962d-603e0deaf8d1",
      "contact_count": 20,
      "_metadata": {
        "self": "https://api.sendgrid.com/v3/marketing/lists/0236d6d2"
      }
    }
  ],
  "_metadata": {
    "self": "https://api.sendgrid.com/v3/marketing/lists?page_size=1&page_token=",
    "next": "https://api.sendgrid.com/v3/marketing/lists?page_size=1&page_token=0236d6d2",
    "count": 82
  }
}

stream_interval `object`

The current stream interval being processed. The keys are defined by the incremental sync component. Default keys are start_time and end_time.

Example:

{
  "start_time": "2020-01-01 00:00:00.000+00:00",
  "end_time": "2020-01-02 00:00:00.000+00:00"
}

stream_partition `object`

The current stream partition being processed. The keys are defined by the partition router component.

Examples:

{
  "survey_id": 1234
}

{
  "strategy": "DESKTOP"
}

{
  "survey_id": 1234,
  "strategy": "MOBILE"
}

stream_slice `object`

This variable is deprecated. Use stream_interval or stream_partition instead.

stream_state `object`

The current state of the stream. The object's keys are defined by the incremental sync's cursor_field the and partition router's values.

Examples:

{
  "created_at": "2020-01-01 00:00:00.000+00:00"
}

{
  "updated_at": "2020-01-02 00:00:00.000+00:00"
}

Interpolation macros

Besides referencing variables, the following macros can be called as part of jinja expressions, for example like this: {{ now_utc() }}.

Now (UTC)

Returns the current date and time in the UTC timezone.

Examples:

'{{ now_utc() }}' -> '2021-09-01 00:00:00+00:00'

'{{ now_utc().strftime('%Y-%m-%d') }}' -> '2021-09-01'

Today (UTC)

Returns the current date in UTC timezone. The output is a date object.

Examples:

'{{ today_utc() }}' -> '2021-09-01'

'{{ today_utc().strftime('%Y/%m/%d')}}' -> '2021/09/01'

Timestamp

Converts a number or a string representing a datetime (formatted as ISO8601) to a timestamp. If the input is a number, it is converted to an int. If no timezone is specified, the string is interpreted as UTC.

Arguments:

datetime: A string formatted as ISO8601 or an integer representing a unix timestamp

Examples:

'{{ timestamp(1646006400) }}' -> 1646006400

'{{ timestamp('2022-02-28') }}' -> 1646006400

'{{ timestamp('2022-02-28T00:00:00Z') }}' -> 1646006400

'{{ timestamp('2022-02-28 00:00:00Z') }}' -> 1646006400

'{{ timestamp('2022-02-28T00:00:00-08:00') }}' -> 1646035200

Max

Returns the largest object of a iterable, or or two or more arguments.

Arguments:

args: iterable or a sequence of two or more arguments

Examples:

'{{ max(2, 3) }}' -> 3

'{{ max([2, 3]) }}' -> 3

Day Delta

Returns the datetime of now() + num_days.

Arguments:

num_days: The number of days to add to now
format: How to format the output string

Examples:

'{{ day_delta(1) }}' -> '2021-09-02T00:00:00.000000+0000'

'{{ day_delta(-1) }}' -> '2021-08-31:00:00.000000+0000'

'{{ day_delta(25, format='%Y-%m-%d') }}' -> '2021-09-02'

Duration

Converts an ISO8601 duratioin to datetime.timedelta.

Arguments:

duration_string: A string representing an ISO8601 duration. See https://www.digi.com/resources/documentation/digidocs//90001488-13/reference/r_iso_8601_duration_format.htm for more details.

Examples:

'{{ duration('P1D') }}' -> '1 day, 0:00:00'

'{{ duration('P6DT23H') }}' -> '6 days, 23:00:00'

'{{ (now_utc() - duration('P1D')).strftime('%Y-%m-%dT%H:%M:%SZ') }}' -> '2021-08-31T00:00:00Z'

Format Datetime

Converts a datetime or a datetime-string to the specified format.

Arguments:

datetime: The datetime object or a string to convert. If datetime is a string, it must be formatted as ISO8601.
format: The datetime format

Examples:

{{ format_datetime(config['start_time'], '%Y-%m-%d') }}

{{ format_datetime(config['start_date'], '%Y-%m-%dT%H:%M:%S.%fZ') }}

Interpolation filters

The following filters can be called as part of jinja expressions, for example like this: {{ 1 | string }}.

Hash

Convert the specified value to a hashed string.

Arguments:

hash_type: Valid hash type for converts ('md5' as default value).
salt: An additional value to further protect sensitive data.

Examples:

{{ 'Test client_secret' | hash() }} -> '3032d57a12f76b61a820e47b9a5a0cbb'

{{ 'Test client_secret' | hash('md5') }} -> '3032d57a12f76b61a820e47b9a5a0cbb'

{{ 'Test client_secret' | hash('md5', salt='salt') }} -> '5011a0168579c2d94cbbe1c6ad14327c'

Base64 encoder

Convert the specified value to a string in the base64 format.

Example:

{{ 'Test client_secret' | base64encode }} -> 'VGVzdCBjbGllbnRfc2VjcmV0'

Base64 decoder

Decodes the specified base64 format value into a common string.

Example:

{{ 'ZmFrZSByZWZyZXNoX3Rva2VuIHZhbHVl' | base64decode }} -> 'fake refresh_token value'

String

Converts the specified value to a string.

Examples:

{{ 1 | string }} -> "1"

{{ ["hello", "world" | string }} -> "["hello", "world"]"

YAML Reference

Components​

DeclarativeSource object​

check #/definitions/CheckStream

streams array #/definitions/DeclarativeStream

version string

schemas #/definitions/Schemas

spec #/definitions/Spec

metadata object

AddedFieldDefinition object​

path array

value string

value_type #/definitions/ValueType

$parameters object

AddFields object​

fields array

$parameters object

ApiKeyAuthenticator object​

api_token string

header string

inject_into #/definitions/RequestOption

$parameters object

AuthFlow object​

auth_flow_type string

predicate_key array

predicate_value string

oauth_config_specification #/definitions/OAuthConfigSpecification

BasicHttpAuthenticator object​

username string

password string

$parameters object

BearerAuthenticator object​

api_token string

$parameters object

SelectiveAuthenticator object​

authenticator_selection_path array

authenticators object

$parameters object

CheckStream object​

stream_names array

CompositeErrorHandler object​

error_handlers array

$parameters object

ConstantBackoffStrategy object​

backoff_time_in_seconds

$parameters object

CursorPagination object​

cursor_value string

page_size integer

stop_condition string

decoder #/definitions/JsonDecoder

$parameters object

CustomAuthenticator object​

class_name string

$parameters object

CustomBackoffStrategy object​

class_name string

$parameters object

CustomErrorHandler object​

class_name string

$parameters object

CustomIncrementalSync object​

class_name string

cursor_field string

$parameters object

CustomPaginationStrategy object​

class_name string

$parameters object

CustomRecordExtractor object​

class_name string

$parameters object

CustomRecordFilter object​

class_name string

$parameters object

CustomRequester object​

class_name string

$parameters object

CustomRetriever object​

class_name string

$parameters object

Components

DeclarativeSource `object`

check `#/definitions/CheckStream`

streams `array` `#/definitions/DeclarativeStream`

version `string`

schemas `#/definitions/Schemas`

spec `#/definitions/Spec`

metadata `object`

AddedFieldDefinition `object`

path `array`

value `string`

value_type `#/definitions/ValueType`

$parameters `object`

AddFields `object`

fields `array`

$parameters `object`

ApiKeyAuthenticator `object`

api_token `string`

header `string`

inject_into `#/definitions/RequestOption`

$parameters `object`

AuthFlow `object`

auth_flow_type `string`

predicate_key `array`

predicate_value `string`

oauth_config_specification `#/definitions/OAuthConfigSpecification`

BasicHttpAuthenticator `object`

username `string`

password `string`

$parameters `object`

BearerAuthenticator `object`

api_token `string`

$parameters `object`

SelectiveAuthenticator `object`

authenticator_selection_path `array`

authenticators `object`

$parameters `object`

CheckStream `object`

stream_names `array`

CompositeErrorHandler `object`

error_handlers `array`

$parameters `object`

ConstantBackoffStrategy `object`

$parameters `object`

CursorPagination `object`

cursor_value `string`

page_size `integer`

stop_condition `string`

decoder `#/definitions/JsonDecoder`

$parameters `object`

CustomAuthenticator `object`

class_name `string`

$parameters `object`

CustomBackoffStrategy `object`

class_name `string`

$parameters `object`

CustomErrorHandler `object`

class_name `string`

$parameters `object`

CustomIncrementalSync `object`

class_name `string`

cursor_field `string`

$parameters `object`

CustomPaginationStrategy `object`

class_name `string`

$parameters `object`

CustomRecordExtractor `object`

class_name `string`

$parameters `object`

CustomRecordFilter `object`

class_name `string`

$parameters `object`

CustomRequester `object`

class_name `string`

$parameters `object`

CustomRetriever `object`

class_name `string`

$parameters `object`

CustomPartitionRouter `object`

class_name `string`